6 Best DJ Speakers With AUX Input

Below is a list of a few Top Powered Speakers for DJing.
1. Behringer EUROLIVE B112D Active PA Speaker System 
2. QSC K12.2 Active Loudspeaker 
3. Electro-Voice ZLX15P Loudspeaker 
4. Yamaha DXR 10 Powered Speaker Cabinet 
5. Mackie Thump 12A Powered Loudspeaker 
6. Pair Rockville RPG15 1Active DJ PA Speaker 
7. JBL EON612 Multipurpose Self-Powered Sound Reinforcement 

You can connect virtual DJ to a Bluetooth speaker through these steps. 
1. Turn on the Bluetooth on the Laptop/Computer
2. Add your Bluetooth speaker 
3. Press the sync button on your Bluetooth speaker and connect and link the two 
4. Open the virtual DJ and go to sound settings 
5. Select the speaker only option and select the sound card, then connect it to your Bluetooth speaker

You can connect your serato DJ to play through your speakers by following method: 
1. Connect your Controller to your device 
2. Go to setting in Serato DJ and then the Audio tab
3. Now under Audio Output, you’ll see an option called ‘Use Laptop Speakers’ 
4. Turn it on and test it. This setting will ensure that your Serato plays through every speaker connected to your device’s audio setting.

All clubs are different in size and people capacity intake. So there’s no simple answer to that question since they are not equal. Based on that, some clubs only have the bass in Mono.
In some others, only the dancefloor is stereo and other speakers in the main area are mono. Other clubs might be all stereo. The club chooses whatever system works better in that specific room.

If you’re considering throwing an indoor house party then you can consider a minimum of five watts per person. So, if you’re inviting 20 people you should aim for at least 100 watts party speakers.
If you’re organizing an open outdoor gig, you should probably double the watts with 10 watts per person. So, if you’re looking for loud party speakers, you can go up to 1000 watts powered speakers for medium to large outdoor parties.

You can set up speakers for a party easily through this method. 
1. Get your speaker’s stand and loosen the knob on it to widen the legs of the stand to your desired level. 
2. Bring up the telescope part of the stand and keep it to your desired height level, use the metal rod to put it through the hole to tighten it. 
3. Now grab your speakers from their handles and you’ll find a hole under the speakers. Now you need to put these speakers on the stand through this hole. 
4. Now plug in your IEC or kettle cord into the power. 
5. Now you need to plug your iPod or phone’s cable into the back of the speakers (this cable has one large Green wired plug to attach in the Green hole in your speakers and the other side small one to fit into the headphones jack of your iPod). 
6. Now bring your volume knob on the speaker to 12 o’clock and plug in your iPhone, iPod or any other device. 
7. Now turn on the power switch on your speaker and press play on any song from your device and adjust the volume to desired level.  
8. You can also link several speakers for a big party and connect them together using XLR cable (3 pin cable). 

You can connect two powered DJ speakers together easily through this method.
1. You need to connect a mini-plug with your device’s headset jack and attach it to the Mp3 input of one speaker.
2. Now at the back of both your speakers, there will be 2 INPUT and 1 OUTPUT. All you need to do is run a single 3. Output out of Speaker 1 (where Mp3 input is plugged in) and join the cable to one of the Inputs on the second speakers. 
4. Now crank your main level all the way up on both speakers, crank up the line level on the 2nd speaker and adjust the volume to your desired level on your Mp3 input speaker. 
5. You also need to make sure any other EQ or DSP settings are identical. Your sub levels and high boost also need to be the same on both speakers. 

The most important skills for a DJ would be to learn Phrasing. Phrasing is usually defined as an “alignment of phrases of two tracks in a mix”. This means that you’re able to connect the alignment of two tracks together without breaking the structure or feel of the new track. 

DJs get their songs through various platforms. 
1. Music Pools: It is a method through which record labels provide music to DJs who have subscriptions with them. These record labels distribute all new music for DJs to play in clubs and parties, and promote their songs. 
2. Record Pools: This is the same as Music Pools, but DJs here now also have access to all new as well as old tracks of the record label. 
3. Podcasts: Many DJs highlight their favourite tracks in several music platforms and mix them up to create a unique song. 
4. Drum Beats Samples: There are several beats and samples available online, many DJs use these and mix them up with their self-created tracks. 

Yes, DJing and mixing with just headphones is a handy and important skill for a DJ to have. Some DJs learn this by choice or some are forced to mix this way at some point. DJs usually learn this on the outset since they have to turn the volume down when they’re practicing. You can master this art of DJing by practicing at home and using the cue mix knob for monitoring your tracks.